RUD PSA INOX-STAR Eyebolts

Additional

Description

Rigging Services supplies the PSA INOX-STAR manufactured by RUD which are not lifting points in a conventional sense. They are used as anchor points for personal fall arrest systems (PSA) that meet the EN 363:2008 standard. These anchor points rotate 360° adjusting to the direction of pull. The M12 is limited to 1 person with a proof force of 12kN while the M16 and M20 sizes can accept up to 2 persons. Manufactured from 1.4462 forged material, both body and bolt are 100% electromagnetic crack tested in accordance with specification EN 1677. Being made of stainless steel makes them suitable for permanent outdoor installation (some limitations apply). Not to be used as a lifting point. If you should require a different thread type, please call one of our branches who will be happy to assist.

Specifications

M Thread Diameter	L Shank Length (mm)	T (mm)	B (mm)	C (mm)	D (mm)	E (mm)	G (mm)	I (mm)	K (mm)	N (mm)	Weight (kg)
M12	18	43	14	12	30	30	32	18	56	8	0.19
M12	50	43	14	12	30	30	32	18	56	8	0.22
M16	24	50	16	15	35	35	38	22	65	10	0.31
M16	50	50	16	15	35	35	38	22	65	10	0.40
M16	120	50	16	15	35	35	38	22	65	10	0.47
M20	30	57	19	17	40	43	47	28	74	12	0.56
M20	60	57	19	17	40	43	47	28	74	12	0.60

Certification

Regulation (EU) 2016/425
Requirements for the design and manufacture of personal protective equipment (PPE) to ensure protection of the health and safety of the user.

DIN 795:2012-10
This European Standard specifies requirements for performance and associated test methods for single-user anchor devices which are intended to be removable from the structure.

DIN CEN/TS 16415:2013-4
This Technical Specification sets out recommendations for requirements, test apparatus, test methods, marking and information supplied by the manufacturer for anchor devices intended for use by more than one user simultaneously. Each eyebolt is marked with 'CE' and the number of acceptable load bearing persons (1 or 2 persons).

DGUV Test
Certified by a notified institution of DGUV Test. DGUV-test certificate No.: PS17060031, PS17060032 and PS17060033. Required forces for lifting points as outlined in OSHA 1926.502:2001/01 paragraph (d)(15) and DIN EN 50308:2005 chapter 4.5.

Inspection/Testing

With over 25 years experience in maintaining its own rental fleet, Rigging Services offers the same regime of inspection and testing in compliance with the LOLER regulations to its clients. Rigging Services engineers are all LEEA qualified as testers, inspectors, and verifiers on lifting & rigging equipment. Using its own bespoke software & hand held devices Rigging Services offers a real-time internet-based reporting portal for onsite inspections and testing. Use our guest username and password to log into our unique Onsite Online service and see what we mean. This cost-effective, paperless solution allows legal compliance and peace of mind.

Search form

You are here

RUD PSA INOX-STAR Eyebolts

Additional